UPVC Replacement Door Handles
Over time the handles on your doors will get worn out and will require replacement. It is essential to keep the same dimensions as the handles that were previously used when replacing them.
The top screw's location as well as the lever and keyhole sizes are the three measurements you have to verify. Use the size guide to assist you.
Inline Lever/Lever
A lever door handle is a contemporary handle that can be installed on replacement or new doors. This kind door handle is offered in a wide range of styles & finishes. A variety of manufacturers provide this type of handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The uPVC/Composite door handles are made of robust materials and are perfect for multi-point lock doors that require a strong design. The handles are inline, and they use the same spindle and screws to secure them. They can be easily mounted on new or existing uPVC/Composite door.
The handle can be placed and angled to fit all users. The handle has been tested for endurance up to 200,000 cycles, this helps to ensure the quality of the finish as well as the performance of the handle over time. The sprung lever is adjustable to accommodate a wide range of locks. This is particularly useful in doors with smaller door frames where the cylinder is located further back. A shorter lever can be used for doors with a latch which can be operated with the thumb on the inside.
Lever Pad
The lever pad upvc handle is different from the lever handles found on most doors. The handle can operate from a single spindle (inline) or independently from each side using two inline or offset spindles (pad). They are generally used on UPVC double-glazed doors and come in a variety of styles and finishes.
The handles are available in a variety of finishes, including White chrome and Gold. The finish is compliant with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, giving the handle a high level of durability and performance for its intended use.
All UPVC lever pads for handles come with a spindle, screws, and can be fitted on a uPVC door. The backplate fixation centres of 211mm allow for a bigger handle, which is usually a benefit when replacing a damaged or old multi-point door lock mechanism. The handle levers come with springs, which eliminate the problem of handles for doors that slide out of the horizontal position when they are not being used.
When choosing the replacement UPVC handle and spindle, it is essential to match the dimensions of the PZ on both the multipoint lock and the uPVC door. This measurement can also be referred to as 'handle centres or cylinder centre'. It is important to match the correct handles.
When you have the right PZ size you will then be required to make sure that the handle lever pads and push pads are a appropriate shape to accommodate the American with Disabilities Act (ADA) approved handles you require for your doors. They are usually of a round or square shape, with an internal lever and external push pad.
The majority of UPVC lever pads that we offer are sprung, which means that they will return to their horizontal position after not being used, instead of hanging out and possibly sticking in the frame. This prevents draughts from entering the property. The majority of UPVC lever pad handles come in both left and right handed models which allows them to be put on either side of doors.
Euro Cylinder
Cylinder locks are commonly found on uPVC doors, but they can be utilized on other types of door. They operate by using a key that unlock a cylinder case which will reveal pins that can be aligned to those in the lock body and allowing them to turn a revolving cam, thus opening the door. Euro cylinders can be fitted with up to six pins. External and internal doors require different levels of security.
The choice of the correct cylinder is essential; it is contingent on how your door and handle are utilized. Doors that are external, for instance, should be fitted with higher security cylinders, whereas internal doors can be secured with a standard cylinder. In addition, some cylinders come with additional features that can improve security even more, like anti-drill or anti-bump features.
To make sure that the euro cylinder is the right size for your door, it must be measured correctly. The cylinder should be measured from the hole in the center of the fixing screw to the end of the cylinder, including the thumb turn if you have one. It is recommended to do this with the lock in place, but in the event that this is not possible, you may take it off to measure. A cylinder that extends beyond the handle and escutcheon could be vulnerable to attacks, such as lock snapping, so it is essential to make sure it's not too long.
The majority of modern cylinders have been made with bump and anti-drill features built into their design. These features are designed to minimize the chance of a attack by causing the cylinder to rotate in the opposite direction. This will help to stop the attack and keep your doors safe.
Some cylinders are designed to resist snapping. This is a more frequent type of attack on cylinders, where the break line in the lock is smashed using a special tool to break off the front of the cylinder and allow the door to be opened. This is a faster and easier way to gain access than using a multipoint locking system. It also leaves less evidence of the burglary which can make it difficult to prove insurance claims.
Spring Cassette
The spring cassette is located in the base of your door handle backplate, providing a spring solution to return your multipoint lock handles to their normal position after using. The handles were previously equipped with no spring and would droop when the locking mechanism was disconnected. The addition of this simple element is among the most effective ways to fix this and it is also an effective way to keep your upvc doors from getting stuck in the open or closed position, as these aren't always simple to manually close by hand.
These spring cassettes are specifically designed for use with sprung multipoint locks They will not work with multipoint handles that are not sprung and you must have a hole specifically cut in your backplate in order for them to fit (please see image for technical diagram). These cassettes can be used as a replacement for damaged or missing cassettes in the backplate of uPVC door handles. They are sold as one unit. upvc replacement door handles repairmywindowsanddoors feature a square cut out that can accommodate an 8mm shaft.
These spring cassettes are an excellent value solution to the problem of door handles that have become sagging. They are simple to install and will increase the lifespan of your uPVC doors. Contact us for more information on our selection of uPVC accessories and spares. We are always available to provide professional advice and assistance you.